The Micro Mill provides higherproduction at low cost. Quite popularly, it is also called high speedclosed tolerance Hammer Mill.

It's low temperature riseduring grinding is particularly advantageous in the handling of heatsensitive materials.

A built in water circulationjacket retains grinding temperatures lower than otherwise. This micromill also improved mixing and dispersion added advantages.

How its works:

The Riddhi Micro Pulverizerconsists of a rotor assembly fitted with beaters and operatesnormally at high speed, a top cover fitted with serrated linerplates, a retaining Screen at the point of pulverizing mill dischargeand a feeder screw assembly where by the ungrounded materials isuniformly feed to the grinding chamber unit.

The grinding action is in thismill is one of impact between rapidly moving beaters dis-sipatesitself in to the fine particles, thus causing size reduction.

* Fine and coarse particle size can be obtained by changing different size & types of beaters. Particle size (Mesh) always depends upon the nature of the materials to be pulverized.
* Output capacity can be increased or decreased by employing different revolutions and power for main drive and feeding arrangements.
* Mill available in mild steel and stainless steel contact parts as per requirements.

Grinding Pulverizer

Grinding Puverizer is used forpowdering any dried hard material to fine powder such as for grindingof all minerals, orches, clays etc.

Grinds anything everthing thatis not wet or sticky.

Micro Pulverizer

These micro pulverizersutilized for soft materials like chemicals, dyestuff, foodstuff,pharma bulk drugs etc. for fine grinding. Since the pulverizer isused vastly

for chemicals & bulk drugs, and other heat sensitivematerials, it has a built-in water jacket to control the temperaturein the grinding chamber.

The grinding takes placethrough attrition between the high speed swinging hammers andserrated liners. Due to very high speed and a smaller chamber size, ahigher fineness is achieved as compared to hammer mill.