"In the work of thepulverizer, do not know what it (Breakers) not to stop there, then Ihave to guillotine it as soon as possible so as not to burn motor,"saying this was a pulverizer plant operator Staff, he said that ifyou can not touch its temper, often caused by the crash phenomenonpulverizers, in the broken materials, we must pay attention to theattention of the material under the uniform, there is a hardness ofthe material According to the hardness of local materials, hardware,if so, can be combined with a bright process.

E-impact pulverizer of themain factors which affect the normal circumstances, E-breakers arethe main factors in ras and to gnaw a few.

Gnaw and Echeng fixed angle isthe angle between the E-set. According to the calculation of themaximum angle of up to 32 degrees gnaw. The actual use of both lessthan 25 degrees, usually around 18-20 degrees. Tetrastichus angletoo, would broken up cavity in the ore out, resulting in injury ordamage to other equipment, at the same time as the increaseTetrastichus angle (greater than broken) decreased productivity. Iadjust the size of the ore row, it changes the size of the anglelocked. In real life, according to the size of the ore scheduled toregulate the emission requirements of the size of the mine mouth.Therefore, to ensure that the product size requirements, as far aspossible to enlarge the mouth mine row is reasonable. Pai mine I canadjust the size of blocks to regulate, regulate the population sizeof the ore row attention should be broken over and the relationshipbetween productivity.

To a certain extent, theincrease in the eccentric axis of rotation, can increase theproduction capacity of the crusher, but also increase the weight ofbroken ore unit of electrical energy consumption. Speed too, wouldhave been broken in the cavity of the broken ore discharged too late,and have a plug, so that instead of reducing production capacity,increase power consumption, E-breakers should be one of the mostappropriate to the number.

The E-Breakers eccentricshaft, connecting rod, the movable plate E, and lining the main axisof wear parts, requiring constant attention and replacement oflubrication.