The structural characteristics of reversible hammer crusher
The structural characteristics of reversible hammer crusher
Single rotor hammer crusher
is a kind of hammer crusher; it is divided into reversible and irreversible two
types.
Reversible hammer crusher rotor first rotates to a direction to crush
the materials and the liner, sieve and hammer end along the direction are
subject to be worn and tore. Having worn to a certain extent, make the rotor
rotate in reverse direction, then the other end of the hammer and the other of
the liner and sieve begin to work, so that the life of the continuous work can
be improved almost doubled. The single rotor irreversible hammer crusher rotor
only rotates in one direction. When the hammer end wears to a certain extent,
you must stop to exchange the direction of the hammer (180 °) or replace it with
a new hammer.
Arc-shaped discharge sieve is mounted below the rotor, and both
ends of the screen bars are mounted on the beam, the outermost screen bars are
pressed by platen, screen bars direction are perpendicular to the arrangement
direction with the rotor movement. The screen bars gap is formed by the middle
of the screen bars protruding part. In order to facilitate material discharge,
screens constitutes a outward expansion screen seam, and also is inclined to the
rotor direction. Pads installed in the feed section, where is the first place to
bear the materials impact and abrasion. Strike plate is assembly by plate and
lining board. The plate is welded with steel, the above liner is high manganese
steel castings, having assembled, it is mounted on the body of crusher with two
shaft bracket. The feed point can be adjusted by the adjustment bolt and the
liner can be replaced if wear. Hammer is hingedly mounted on the pin, because it
is free hanging, it outwardly flares in a high-speed rotation.
sand maker : http://www.ore-mills.com/sand-maker.html
China magnetic
separator : http://www.crusher-export.com/magnetic-separator.html