Hardware only bundle for FiatECUScan software,compatible fully with fiateucscan.

All the hardware required to use the excellent FiatECUScan software for Fiat, Alfa Romeo and Lancia vehicles - for use with the free shareware version of the software, or if you already have a full version software license.

Not only do you get the 2 hardware interfaces required for full software coverage, but we include specific break-out adaptor cables for supported Airbag, ABS, Power Steering and CAN systems, so there's no need to modify your interfaces.

Please note this bundle does NOT include the FiatECUScan software license. It can be used with the free version, or full version licenses are available separately.

System requirement:
-FiatECUScan software (free or licensed version)
-Compatible vehicle - see FiatECUScan's Supported Vehicles list
-A laptop or PC running Win XP, Vista or Win 7
-Microsoft .NET Framework Version 2.0 SP1, download from www.microsoft.com
- 1.5GHz CPU or higher

IMPORTANT NOTE: The coloured adaptor cables are only intended for use with the FiatECUScan software, on supported Fiat group vehicles listed as requiring them on the FiatECUScan Supported Vehicles List.
Use on other vehicles or with other software is not supported and may cause damage to your vehicle or equipment.

CAN Info ELMOBDKey
CAN Setup / PROXI Alignment Procedure ELMOBDKey
Driver's Door (BITRON) ELMOBDKey
Driver's Door (G.E. PROCOND) ELMOBDKey
Passenger's Door (BITRON) ELMOBDKey
Passenger's Door (G.E. PROCOND) ELMOBDKey 

Supported software:
AlfaDiag
FiatECUScan
VCDS 409.1

USB Driver:
FTDI USB Chipset Drivers can be downloaded from here.

Adaptor Pin Configurations:
Green Adaptor Lead =
Female pin7 to male pins 1,7,9,12.

Red Adaptor Lead =
Female pin7 to male pin 3

Yellow Adaptor Lead =
Female pin6 to male pin 1
Female pin 14 to male pin 9
Female pin 7 to male pin 12

Package:
Green Adaptor Lead (FiatEcuScan Adaptor 1) = Engine, ABS, Power Steering
Red Adaptor Lead (FiatEcuScan Adaptor 2) = Airbag
Yellow Adaptor Lead (FiatEcuScan Adaptor 3) = CAN
ODB2 USB Diagnostic Lead KKL (VAG-COM)