Six criteria for Raymond mill maintenance
Six criteria for Raymond mill maintenance
The raymond mill,
also known as Raymond, has stable performance, strong adaptability and high
cost-effective; since the introduction of more than 20 years, it has been spread
used in the processing of non-metallic mineral. In order to make Raymond mill
keep normal and safe operation for long-term, developing "equipment maintenance
and safe operation system" can ensure the mill operation, at the same time,
operators have a need to learn some common sense about Raymond and nurturing
maintenance, so that timely process it when they encounter problems.
1, in
the course of raymond mill, there should be fixed personnel responsible for the
care, the operator must have a certain level of technology. Before installing
mill, the operating personnel must carry out the necessary technical training so
that understood that the principle of Raymond mill performance and familiar with
the operating procedures.
2, in order to keep mill normal, we should develop
equipment "equipment maintenance and safe operation system to ensure the mill
keep long-term safe operation, and at the same time have the necessary repair
tools and grease and accessories.
3, having been used for some time, overhaul
and maintain the wearing parts of the roller mill ring blade, grinding roller
device in use before connecting bolt nut should be carefully examined to see if
loosening, or to add a little grease.
4, if the roller device using time more
than 500 hours or so, please replace the roller, each roller comprising rolling
bearings must be cleaned, damaged parts should be replaced, and refueling tool
can be manually and use the oil pump and grease gun.
5, the scrap limit of
ring roller mill is that the remaining minimum wall thickness is not less than
10mm.
6, if Raymond mill parking, stop the feed, the host still continues, so
the residual abrasive to continually be milled; after about a minute, you can
turn off host motor and analyzer motor, stop grinding work, followed by stops
the fan motor, in order to blow the net residual powder.
Impact crusher :
http://www.crusher-export.com/impact_crusher.htm
flotation separator :
http://www.ore-mills.com/flotation-cell.html