Measure for chimney corrosion problem of dryer
Measure for chimney corrosion problem of dryer
1) due to the corrosive action of the dryer machine flue
gas and slag abrasive particles are strong, dryer system air leakage has been
plagued by cement companies, therefore, strengthen the dryer system plugging
wind not only conducive to the dryer energy yield, but also related to the
stable operation of the dust removal equipment.
2) Flue gas temperature
control and alarm devices sound and light alarm sound is harsh, so post
operators often close it which makes the device malfunction. Therefore, in the
day-to-day production management we need to frequently check alarm device to
ensure the normal operation.
3) According to a survey of some of the cement plants, in
some enterprises often found the dryer inspection door was not strict, which
exist serious safety hazard, the cement enterprises must pay attention to safety
issues dryer.
1.Dryer chimney corrosion problem
1) Dryer flue gas has
strong corrosion, plus dryer dust
collector outlet pipe and chimney are without thermal insulation, it is
easily in the winter, the flue gas in the chimney appear condensation, and even
chimney wall drip, exacerbating chimney corrosion (mainly water-soluble sulfate
electrochemical corrosion).
2) In chimney making process, we generally brush
secondary room temperature antirust paint; dryer flue gas temperature is at
60-150%; new chimney near anti-rust paint quickly produces bubble and fall off,
the protective layer is damaged , speeding up the chimney corrosion.
2.
Measures and effect
1) change round chimney into a rectangular chimney (in
chimney replacement process, coiling machine fails, for safety and without
affecting the production, we had to take a welding method), the four corners of
the rectangle use 30mmx30mm angle iron for reinforcement, chimney pipe adopts
flange connection.
2) Take rust treatment, use high temperature (400 C)
anti-rust paint to brush 2 times. After the end of the on-site installation and
welding, use anti-rust paint brush the welding place again.
ore beneficiation : http://www.ore-mills.com/
Cone crusher supplier :
http://www.ore-machine.com/cone-crusher.html